2012_0820_sll109
Alt51_2012
2011_0524_sll001
2012_0820_sll109
Model: SLL109
Greyheart
(0 Reviews)
$4.65

Bulk Discount

10 - 24
- $4.42
25+
- $4.19
50+
- info

Silver Filled Mustache, 24g - Distinguished

  • Height: 17.5mm (.68")
  • Width: 52mm (2.05")
  • Thickness: 24g
  • These can be a little sharp as they are a raw material. 
  • If you solder Silver Filled, it will cause the silver to bubble a bit and result in a reticulated look.

This is a Beaducation Original and you won't find it anywhere else!

  • Silver Filled blanks can be oxidized and polished just as Sterling Silver.
  • To finish the edges of these Silver Filled blanks, we recommend hammering the edges or tumbling your finished piece.  Filling or sanding is not recommended as it may expose the copper core.
  • Silver Filled is hundreds of times thicker and more durable than Silver Plated.
  • Silver Filled is a thick layer of .925 Sterling Silver mechanically bonded to copper.
  • Silver Filled is 1/10 or 10% by silver weight.
  • Anyone who can wear Sterling Silver can wear Silver Filled without an allergic reaction.
  • To pop any additional holes in this blank, we recommend using the Screw Down Hole Punch, not the Hole Punch Plier.  When punching with the Hole Punch Plier, you often need to file the back a bit.  Filing might expose the copper core.
Made_in_usa
Silver Filled Stamping Blanks
loading the player....

  • Hundreds of times thicker and more durable than Silver Plated.
  • Silver Filled is a thick layer of .925 Sterling Silver mechanically bonded to copper.
  • Silver Filled is 1/10 or 10% by silver weight.
  • Can be oxidized and polished just like Sterling Silver.
  • Filling or sanding is not recommended as it may expose the copper core.
  • If you solder Silver Filled, it will cause the silver to bubble a bit and result in the reticulated look.
  • Anyone who can wear Sterling Silver can wear Silver Filled without an allergic reaction.
  • To pop any additional holes in this blank, we recommend using the Screw Down Hole Punch, not the Hole Punch Plier. 
  • When punching with the Hole Punch Plier, you often need to file the back a bit.  Filing might expose the copper core.
  • With filled blanks, we recommend polishing with a Pro-Polish pad or tumbler.
  • Do not use steel wool or sand paper on these blanks. 

 LEARN MORE...

This item does not have any reviews yet. Be the first!