- Design measures: 6mm wide by 8.5mm high
- Made from 3/8" square heat-treated tool steel
- Beaducation Original Design
- Made in the USA
- Arrive coated in oil to prevent rusting
- Wipe oil away with paper towel. Do not use water.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.
For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
This stamp is incredible. This, along with the other Beaducation originals, produce clean and deep impressions. I've found that each design stamp requires some practice, so make sure to use it a few times before diving into sterling silver or another precious metal.
The detail in this stamp is lovely. Very crisp and deep. As the other poster stated give it a wack on some scrap metals first before going on to your real things. Looked bigger on the rivet ring diy that I saw but i love this.