Model: LS004
(2 Reviews)
  • These stamps require a 2lb hammer and a lot of practice.
  • Click on the PDF below to review the Tilt n' Tap method.  A slow and consistant Tilt n' Tap is necessary to get this large stamp to impress properly.
  • Design measures: 7/16" (17.5mm) exterior diameter, 3/8" (10mm) interior diameter.
  • This leaves nearly 10mm of inner circle stamping space!
  • Made from 3/4" square heat-treated tool steel.
  • Beaducation Original Design
  • Made in the USA 
  • Arrive coated in oil to prevent rusting. 
  • Wipe oil away with paper towel. Do not use water.

Tips for Using Design Stamps
{Click here to download} (PDF, 1.2MB)



Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.

For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.


Love this cloud border stamp! It stamps great and Easy,Just love it!
Wendy Visser
I love these border stamps! They are large & require a steady hand and a hard hit with the hammer. The result is amazing!