2013_0820_ls003
2011_0208_ls002
2013_0820_ls003
Model: LS003
Greyheart
Grey_stars
Stars
(2 Reviews)
$26.00
    • These stamps require a 2lb hammer and a lot of practice.
    • Click on the PDF below to review the Tilt n' Tap method.  A slow and consistent Tilt n' Tap is necessary to get this large stamp to impress properly.
    • Design measures: 5/8" (16mm) exterior diameter, 1/2" (12.5mm) interior diameter.
    • This leaves 12mm of inner circle stamping space!
    • Made from 3/4" square heat-treated tool steel.
    • Beaducation Original Design
    • Made in the USA 
    • Arrive coated in oil to prevent rusting. 
    • Wipe oil away with paper towel. Do not use water.

DesignStamps are a bit tricky. I highly recommend you practice on some cheaper metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.

For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a utility hammer (nail pounding hammer) which weighs at least 16 ounces. Feel free to hit the stamp more than once, but hold that stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, thebetter your impression will be.

Tips for Using Design Stamps
{Click here to download} (PDF, 1.2MB)

 

Made_in_usa
Fancy Border Stamps
loading the player....

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.

For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.

 

Grey_stars
Stars
I was nervous about using this at first because it's so big, so I practiced on some flubbed blanks. I used a 2lb. hammer, and the stamps were almost perfect from the start! Great product.
03/16/2015
SharonBlackmon
Grey_stars
Stars
very tricky stamp, I can never get the full border
03/16/2015
Kelly