2011_0208_ls001
2011_0216_ls001alt1
2011_0216_ls002alt2
2011_0208_ls001
Model: LS001
(0 Reviews)
Error_icon
This product is no longer available.
  • These stamps require a 2lb hammer and a lot of practice.
  • Click on the PDF below to review the Tilt n' Tap method.  A slow and consistant Tilt n' Tap is necessary to get this large stamp to impress properly.
  • Design measures: 5/8" (16mm) exterior diameter, 1/2" (12.5mm) interior diameter.
  • Made from 3/4" square heat-treated tool steel.
  • Beaducation Original Design
  • Made in the USA 
  • Arrive coated in oil to prevent rusting. 
  • Wipe oil away with paper towel. Do not use water.

 

 

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.

For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

 

Tips for Using Design Stamps
{Click here to download} (PDF, 1.2MB)

 

This item does not have any reviews yet. Be the first!