Tronex5223short
Tronex5223short
Model: CUT008
(0 Reviews)
Error_icon
This product is no longer available.

The handle on these cutters is 2 3/4" long.

This Tronex Tapered Head cutter has a razor flush edge finish. The cutting edges are machine ground to make them razor sharpwith perfect alignment. Wire cut with these tools will be very flush with almost no "pinch". They have a fine set screw stop builtinto the handle to prevent these exceptionally sharp edges from dulling themselves, even when you apply a very strong cutting force.

~ USE ON SOFT METALS ONLY.

~ ONLY USE THE TIP OF THE CUTTER TO CUT SOFT 22 GAUGE OR THINNER
  • 100% manufactured in the USA
  • High-grade alloy steel
  • Each cutter tested individually
  • Distinctive "Snap" cutting performance
  • You can send your tool directly to Tronex and they will sharpen it, replace the grips, the washer, and the screw all for about $10! Here's the address:

    Tronex Technologies
    2860 Cordelia Road
    Fairfield, CA 94534
These cutters are recommended and used in many of our Fusing online classes.
Do not use the tip to cut anything thicker than 22 gauge.

These cutters are great forfine silver fusing because to fuse you need an extra flush cut. Youcould cut a bit thicker with these if working with fine silver becauseit is so much softer.
Made_in_usa

This item does not have any reviews yet. Be the first!