Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges
![Metal Stamping Blanks Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges](https://d2pafxp37ue0ak.cloudfront.net/system/zen_products/images/8080/larger/5_22_20_AT269.jpg?Metal Stamping Blanks Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges)
![Metal Stamping Blanks Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges](https://d2pafxp37ue0ak.cloudfront.net/system/product_images/images/7477/larger/alt1576_AT269_V2.jpg?Metal Stamping Blanks Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges)
Model: AT269
$3.60
Aluminum Bracelet Blank, 152mm (6") x 19mm (.75"), 12 Gauge - Deburred with Smooth Edges
- 152mm (6") x 25mm (1")
- Thickness: 12 gauge
- Deburred with smooth edges.
- No extra finishing required.
- Here are tools we recommend for shaping bracelet blanks into cuffs.
- Aluminum Metal Info -
- If the blank has a protective film, remove it before stamping.
- Requires a lighter hammer strike.
- Lightweight.
- Does not tarnish.
- Not for soldering, but great for riveting!
- We recommend a Sharpie, Gilders Paste or JAX Aluminum Blackener to darken impressions (this does not apply to anodized aluminum).
- Silver Black and Liver of Sulfur are NOT recommended.
- Something about the polishing compound in Pro Polish Pads can sometimes cause a "cloudy" look on aluminum. For this reason we recommend using a Sunshine Cloth to polish your aluminum and Rubbing Alcohol to remove any surface ink or enamel used to fill impressions.
- We recommend using the Screw Down Hole Punch or the Power Punch Plier rather than hole punch pliers.
LEARN MORE...
Frequently Purchased Together
AT173
$2.60
AT266
$2.25
KA194
$3.95
