Aluminum Snowflake Ornament Blank, 55.5mm (2.19") x 47.5mm (1.87")
![Metal Stamping Blanks Aluminum Snowflake Ornament Blank, 55.5mm (2.19") x 47.5mm (1.87")](https://d2pafxp37ue0ak.cloudfront.net/system/zen_products/images/7818/larger/11_7_19_AT239.jpg?Metal Stamping Blanks Aluminum Snowflake Ornament Blank, 55.5mm (2.19") x 47.5mm (1.87"))
Aluminum Snowflake Ornament Blank, 55.5mm (2.19") x 47.5mm (1.87")
- Dimensions: 55.5mm (2.19") x 47.5mm (1.87")
- Thickness: 14 gauge
- Aluminum Metal Info -
- If the blank has a protective film, remove it before stamping.
- Requires a lighter hammer strike.
- Lightweight.
- Does not tarnish.
- Not for soldering, but great for riveting!
- We recommend a Sharpie, Gilders Paste or JAX Aluminum Blackener to darken impressions (this does not apply to anodized aluminum).
- Silver Black and Liver of Sulfur are NOT recommended.
- Something about the polishing compound in Pro Polish Pads can sometimes cause a "cloudy" look on aluminum. For this reason we recommend using a Sunshine Cloth to polish your alumnumun and Rubbing Alcohol to remove any surface ink or enamel used to fill impressions.
- We recommend using the Screw Down Hole Punch or the Power Punch Plier rather than hole punch pliers.
