Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Metal Stamping Tools Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
Model: DS801
Greyheart
Grey_stars
Stars
(3 Reviews)
$28.00
Qty:

Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original

  • Designs measure: 5mm x 2.5mm. and 4mm x 1.5mm
  • Made from two 1/4" square heat-treated tool steel shanks.
  • Beaducation Original Design.
  • Made in the USA.
  • Arrives coated in oil to prevent rusting. 
  • Wipe oil away with paper towel. Do not use water.
- BIG NEWS, This Stamp Is Rated for Stainless -
  • Rated to use on all soft metals and stainless steel (if you are a neebie, "rated" means it's specifically rated yes/good/go for it).
  • Knives are hardened steel and none of our stamps should be used on knife blades.
  • Just because a stamp "can" stamp in stainless, doesn't mean it will be easy. We do not recommend this metal for beginners. Stainless steel is very difficult to stamp on because it is such a hard metal. The larger and/or more intricate the design, the harder it will be to impress into stainless. Tape your blank to your bench block and consider using a 2 lb hammer.
  • We highly recommend buying a few stainless steel blanks to use as practice pieces.

WAIT, WHAT? Haven't you always said to not use these stamps on stainless?

The short answer - Yes, you are correct. Our rule has been to keep our stamps off of all stainless but we have now realized that is too general. Not all stainless is created equal and with the now widely available jewelry-grade stainless blanks (most often grade 304, 316 or 430), we have discovered that our stamps hold up great on non-hardened stainless (all the stainless blanks we sell).

The long answer - The rule to keep our stamps off stainless came from years ago when we really couldn't tell what kind of stainless people were stamping on but often it was non-jewelry items that were too hard and could damage the stamps. Now that we carry blanks made mostly for jewelry intention (and some pet tags) we decided to reevaluate and take a closer look and challenge our rule. After extensive research and testing of both our tools and stainless blanks (both in-house and sending them out to machine shops to be tested), the results are in....and we can say with total confidence that our stamps will hold up on non-hardened stainless. I (Lisa) have personally tested many of our Beaducation Original design stamps and letter sets and I've had a handful of customers test them as well (testing with 100+ impressions). We have found that they can impress into stainless steel quite well AND they hold up. For example, I stamped one of our script letters 700 times into a few of our stainless blanks (and on a spoon!). The stamp and its impression still look great. That being said, if you are wondering how long they will last if mainly being used in stainless, we really have no way of accurately answering that. There are so many factors involved (what exactly you are stamping, the amount of detail in the design, overall stamp size, what size hammer you use, etc.) but based on our testing, it will last a long time. :)

The Advantage Series and Stamp Yours stamps will last even longer. They are very sharp faced and made to endure high volume stamping in stainless (but again, don't stamp on hardened knife blades).

Made_in_usa

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.

For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.

 

Grey_stars
Stars
These sweet leaves give the perfect detailed stamps to your floral creation.
02/16/2019
Jackie
Grey_stars
Stars
I really like the undulating shapes of these leaves. They lend a natural look to my stems and twigs.
03/21/2019
Joyce
Grey_stars
Stars
These leaves do not disappoint. I had hesitated to buy them, because I was not sure about the size. I cannot visualize size at all. They are perfect. They are great leaves for stems and floral designs AND I also look forward to using them to create fall designs. These stamp very well!
03/25/2019
Stacy
Frequently Purchased Together
DS656
Grey_stars
Stars
Greyheart
Metal Stamping Tools Swirly Cloud Metal Design Stamp, 8mm - Beaducation Original
$15.00
Qty:
DS726
Grey_stars
Stars
Greyheart
Metal Stamping Tools Violet Flower Metal Design Stamp, 5.6mm - Beaducation Original
$14.00
Qty:
DS431
Grey_stars
Stars
Greyheart
Metal Stamping Tools Garden Branch Border Metal Design Stamp-Beaducation Original (Right Facing)
$17.00
Qty:
DS108
Grey_stars
Stars
Greyheart
Metal Stamping Tools Tiara Metal Design Stamp, 5mm - Beaducation Original
$14.00
Qty:
DS625
Grey_stars
Stars
Greyheart
Metal Stamping Tools Garden Branch Border Opposing Direction Metal Design Stamp-Beaducation Original (Left Facing)
$17.00
Qty:
DS623
Grey_stars
Stars
Greyheart
Metal Stamping Tools Hip Peacock Feather Design Stamp, 11mm - Beaducation Original
$17.00
Qty:
KA110
Grey_stars
Stars
Greyheart
Metal Stamping Blanks Aluminum Rectangle, 38mm (1.50") x 6.4mm (.25"), 18g, Pack of 5
$3.47
Qty:
DS546
Grey_stars
Stars
Greyheart
Metal Stamping Tools Circle Metal Design Stamp 6mm - Beaducation Original
$15.00
Qty:
DS463
Grey_stars
Stars
Greyheart
Metal Stamping Tools Daisy Flower Face 2.5mm Metal Design Stamp - Beaducation Original
$14.00
Qty:
DS432
Grey_stars
Stars
Greyheart
Metal Stamping Tools Curved Bracket Border Metal Design Stamp-Beaducation Original
$17.00
Qty:
SS917
Greyheart
Jump Rings Sterling Silver 4mm I.D. Locking Ring, Pack of 10
$6.33
Qty:
POL004
Grey_stars
Stars
Greyheart
Jewelry Making Tools Pro Polish Pad (pack of 10)
$3.75
Qty: