Unicorn Head Metal Design Stamp, 8mm - Beaducation Original
- Design measures: 8mm high and 5mm wide.
- Made from 3/8" square heat-treated tool steel.
- Beaducation Original Design.
- Arrive coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.
For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
Another winner. Nice detail and stamps very nice too.
I love unicorns, always have, always will!! I was delighted to have this stamp. Finally unicorns are getting popular again...it's been 30 years! This is fun, fun. I use the tilt and tap on this for better detail. I could go up to my 2# hammer, but I usually save that for the BIG stamps or heavier gauge blanks. Unicorns and mermaids lend themselves to fantasy collage quite well. Then add in a bit of pastel pink, lavendar, and teal patina to finish it off. I've been working on a little line drawing of a fairy because we really need a fairy to add to the garden...and maybe a teddy bear or two for a picnic.