Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original
Model: DS613
Greyheart
Grey_stars
Stars
(11 Reviews)
$17.00
Qty:

Tall Moroccan Arch Metal Design Stamp, 11mm Beaducation Original

  • Design measures: 11mm wide by 7mm high.
  • Made from 1/2" square heat-treated tool steel.
  • Beaducation Original Design.
  • Arrive coated in oil to prevent rusting. 
  • Wipe oil away with paper towel. Do not use water.
- BIG NEWS, This Stamp Is Rated for Stainless -
  • Rated to use on all soft metals and stainless steel (if you are a neebie, "rated" means it's specifically rated yes/good/go for it).
  • Knives are hardened steel and none of our stamps should be used on knife blades.
  • Just because a stamp "can" stamp in stainless, doesn't mean it will be easy. We do not recommend this metal for beginners. Stainless steel is very difficult to stamp on because it is such a hard metal. The larger and/or more intricate the design, the harder it will be to impress into stainless. Tape your blank to your bench block and consider using a 2 lb hammer.
  • We highly recommend buying a few stainless steel blanks to use as practice pieces.

WAIT, WHAT? Haven't you always said to not use these stamps on stainless?

The short answer - Yes, you are correct. Our rule has been to keep our stamps off of all stainless but we have now realized that is too general. Not all stainless is created equal and with the now widely available jewelry-grade stainless blanks (most often grade 304, 316 or 430), we have discovered that our stamps hold up great on non-hardened stainless (all the stainless blanks we sell).

The long answer - The rule to keep our stamps off stainless came from years ago when we really couldn't tell what kind of stainless people were stamping on but often it was non-jewelry items that were too hard and could damage the stamps. Now that we carry blanks made mostly for jewelry intention (and some pet tags) we decided to reevaluate and take a closer look and challenge our rule. After extensive research and testing of both our tools and stainless blanks (both in-house and sending them out to machine shops to be tested), the results are in....and we can say with total confidence that our stamps will hold up on non-hardened stainless. I (Lisa) have personally tested many of our Beaducation Original design stamps and letter sets and I've had a handful of customers test them as well (testing with 100+ impressions). We have found that they can impress into stainless steel quite well AND they hold up. For example, I stamped one of our script letters 700 times into a few of our stainless blanks (and on a spoon!). The stamp and its impression still look great. That being said, if you are wondering how long they will last if mainly being used in stainless, we really have no way of accurately answering that. There are so many factors involved (what exactly you are stamping, the amount of detail in the design, overall stamp size, what size hammer you use, etc.) but based on our testing, it will last a long time. :)

The Advantage Series and Stamp Yours stamps will last even longer. They are very sharp faced and made to endure high volume stamping in stainless (but again, don't stamp on hardened knife blades).

Made_in_usa

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.

For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.

 

Grey_stars
Stars
I own all of these manfala stamps. I love that there is two sizes. Crisp impressions add beautiful detail to any project.
11/15/2017
Donna P.
Grey_stars
Stars
So versatile, but so simple and pretty
12/15/2017
Love
Grey_stars
Stars
What a beautiful design! I look forward to experimenting with it, along with the smaller version, to create mandalas.
03/02/2018
Joyce
Grey_stars
Stars
I had been looking at this stamp for quite a while and finally took the plunge because of the new, smaller crystal setter. This is a beautiful design. I have found because of the larger size of the stamp I must use tilt and tap to get a full impression in addition to using my 2lbs hammer.

I do feel the design possibilities will be quite a lot with this arch- especially in combination with the smaller version. I am also thinking these will be gorgeous stamps to use on Christmas ornaments.
04/12/2018
Stacy
Grey_stars
Stars
I am in love with these arch stamps! Stamps really nicely and adds a nice flair!
04/18/2018
Lisa
Grey_stars
Stars
This works good as a bracket with an initial in the center.
05/18/2018
Wendy
Grey_stars
Stars
I have all the Moroccan Arch stamps and use them a lot in mandala. Lovely stamps to use highly recommended.
05/20/2018
Nicola Walling
Grey_stars
Stars
I seriously love all their arches!
07/20/2018
Haley
Grey_stars
Stars
I adore the Moroccan Arch stamps. Especially the combination of Tall and Wide Moroccan Arch makes the designs really sophisticated. Love it!
09/24/2018
Anke, Germany
Grey_stars
Stars
Love!!! I seriously can’t get enough of beaducation’s mandala design stamps!
03/21/2019
Brenda L
Grey_stars
Stars
This is an amazing stamp. I love using it to make mandalas.
04/15/2019
Lynne
Frequently Purchased Together
DS616
Grey_stars
Stars
Greyheart
Metal Stamping Tools Wide Moroccan Arch Metal Design Stamp, 11mm - Beaducation Original
$17.00
Qty:
DS519
Grey_stars
Stars
Greyheart
Metal Stamping Tools Indian Curve Metal Design Stamp - Beaducation Original
$15.00
Qty:
DS614
Grey_stars
Stars
Greyheart
Metal Stamping Tools Tall Moroccan Arch Metal Design Stamp, 6mm - Beaducation Original
$15.00
Qty:
DS236
Grey_stars
Stars
Greyheart
Metal Stamping Tools Spiral Bracket Metal Design Stamp, 9mm - Beaducation Original
$17.00
Qty:
DS709
Grey_stars
Stars
Greyheart
Metal Stamping Tools Fan 3, Fountain Metal Design Stamp - Beaducation Original
$15.00
Qty:
DS433
Grey_stars
Stars
Greyheart
Metal Stamping Tools Symmetrical Branch Border Metal Design Stamp-Beaducation Original
$17.00
Qty:
DS710
Grey_stars
Stars
Greyheart
Metal Stamping Tools Fan 2, Whimsical Metal Design Stamp - Beaducation Original
$15.00
Qty:
DS517
Grey_stars
Stars
Greyheart
Metal Stamping Tools Triangle Curve Metal Design Stamp - Beaducation Original
$15.00
Qty:
DS625
Grey_stars
Stars
Greyheart
Metal Stamping Tools Garden Branch Border Opposing Direction Metal Design Stamp-Beaducation Original (Left Facing)
$17.00
Qty:
DS706
Grey_stars
Stars
Greyheart
Metal Stamping Tools Vintage Sunrise Metal Design Stamp, 11mm - Beaducation Original
$17.00
Qty:
DS615
Grey_stars
Stars
Greyheart
Metal Stamping Tools Wide Moroccan Arch Metal Design Stamp, 6mm - Beaducation Original
$15.00
Qty:
DS618
Grey_stars
Stars
Greyheart
Metal Stamping Tools Scroll Detail Metal Design Stamp, 5mm -  Beaducation Original
$14.00
Qty: