Small Leaf / Feather Design Stamp 7mm - Beaducation Original
- Design measures: 2.3mm wide by 7.25mm high.
- Made from 3/8" square heat-treated tool steel.
- Beaducation Original Design.
- Arrive coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
- Check out our Large Leaf/Feather Design Stamp 11mm.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.
For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
Small leaf/feather is beautifully detailed with a crisp impression every time!
I have not used this one as much but when I have the detail is spot on! It is crisp and clean. I have used this on ring bands and in Mandalas.
Feather or leaf? This one can wear two hats and it's a great one to add a little something extra to your pieces. Leaves (sorry for the pun) a great impression.