Metal Stamping Tools Tiny Spiral Metal Design Stamp, 2.7mm - Beaducation Original
Metal Stamping Tools Tiny Spiral Metal Design Stamp, 2.7mm - Beaducation Original
Metal Stamping Tools Tiny Spiral Metal Design Stamp, 2.7mm - Beaducation Original
Metal Stamping Tools Tiny Spiral Metal Design Stamp, 2.7mm - Beaducation Original
Model: DS112
Grey_stars
Stars
(1 Review)
Error_icon
This product is no longer available.
  • Design measures: 2.7mm wide by 2.7mm high.
  • Made from 1/4" round heat-treated tool steel.
  • This is an original Beaducation design.

 

Made_in_usa

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.

For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.

 

Grey_stars
Stars
I like this stamp. It is a great design for adding just that little extra when you need to fill space. I do have to use the tap and tilt method for stamping, but that is ok.
05/23/2017
Angel H