Elephant Metal Design Stamp, 11.5mm - Beaducation Original
- Design measures: 11.5mm wide by 7mm high.
- Made from 1/2" square heat-treated tool steel.
- Arrive coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
This elephant is adorable! I actually purchased it because of images someone shared on the Facebook Group. It leaves a nice impression. Definitely use tilt and tap on this one.
Elephants are cute. Buy this stamp. Hit it a couple times to make sure his trunk gets a good impression.
Cute little stamp. Makes a nice impression with a couple whacks and tap-n-tilt!