Camera Metal Design Stamp, 8mm - Beaducation Original
- Design measures: 8mm wide by 7.5mm high.
- Made from 3/8" square heat-treated tool steel.
- Arrive coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
As a former professional photographer, I knew I NEEDED this stamp! Super clear impression.
Love the weird and unusual. I also love photography. Very excited about this stamp!
I used a 2# brass hammer and got a clean, crisp impression on sterling silver and annealed copper (both 24 gauge).
Great little stamp! Makes a nice impression.