ImpressArt Medical Symbol (Caduceus) Design Stamp, 5.5mm
- Design measures: 5.5mm x 4.5mm
- Made from 3/8" square heat-treated tool steel.
- Arrives coated in oil to prevent rusting.
- This Stamp is Rated for Stainless Steel -
- Rated to use on all soft metals and stainless steel.
- Knives are extra hardened and none of our stamps should be used on knife blades.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
Perfect for stamping custom medical ID bracelets.
Super stamp, just used it to make a custom medical id bracelet
Awesome stamp! Have done a couple of custom orders with this baby! Tilt and tap away
a bit hard to see detail.
Hard to see detail unless you pound hard. Forget about lining it up and re-stamping. Great with aluminum tricky with copper. Just strike hard and you will be okay.
Perfect for my Service Dog Tags.
Got it to create a medical ID
Works easily on aluminum and great to have on hand because someone is surely going to ask you to make a medical bracelet or tag!
Makes a decent impression. Make sure you have it flat before you hit or it's easy to not get the impression of the very tip.