The handle on these cutters is 3 3/4" long.
The head of this cutter is oval shaped rather than pointed which gives it more strength to cut heavier metals.
~ USE ON SOFT METAL ONLY.
~ This cutter can be used to cut up to a 14 gauge (for Sterling) but ONLY USE THE TIP OF THE CUTTER TO CUT SOFT 20 GAUGE OR THINNER
This Tronex Tapered Head cutter has a razor flush edge finish. The cutting edges are machine ground to make them razor sharp with perfect alignment. Wire cut with these cutters will be very flush with almost no "pinch". They have a fine set screw stop builtinto the handle to prevent these exceptionally sharp edges from dulling themselves, even when you apply a very strong cutting force.
- 100% manufactured in the USA
- High-grade alloy steel
- Each cutter tested individually
- Distinctive "Snap" cutting performance
- You can send your tool directly to Tronex and they will sharpen it, replace the grips, the washer, and the screw all for about $10! Here's the address:
2860 Cordelia Road
Fairfield, CA 94534
Kate Richbourg uses these cutters in our Soldered Rim Pendant
This cutter is GREAT for your thicker gauges. Like we said above, you can cut up to 14 gauge, but if cutting Fine Silver (which is significantly softer than Sterling) you can cut up to 10 gauge.
These cutters are great forfine silver fusing because to fuse you need an extra flush cut. Youcould cut a bit thicker with these if working with fine silver becauseit is so much softer.
I am so happy with these, they get in very tight with no pinch and are very comfortable on the hand. I use them currently for wire wrapping earrings with 26, 24, and 22 gauge wire.
I love love love these pliers!