- Design measures: 3mm wide by 3mm high.
- Made from square carbon tool steel.
- Also available in two alternate sizes: 1/16" (1.6mm), and 3/32" (2.4mm).
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of copper sheet for practicing.
For best results with Design Stamps, make sure there is NO padding under your Bench Block, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
15 - 20% Off Site Wide Sale November 23rd - 27th!
I have used this stamp so many times in different ways...texturing, decorations around other stamps, etc. This is a quality stamp and the size is small, but not extremely tiny where you can't make out the detail. It stamps perfectly, and I appreciate that immensely. It's my go-to stamp a lot.