Metal Stamping Tools Oak Leaf Design Stamp 1/16" (1.6mm)
Metal Stamping Tools Oak Leaf Design Stamp 1/16" (1.6mm)
Model: DS161
(0 Reviews)
This product is no longer available.
  • Design measures: .5mm (1/2mm) wide by 2mm high.
  • Made from square carbon tool steel.
  • Also available in two alternate sizes: 3/32" (2.4mm), and 1/8" (3.18mm).

***NOTE- This size leaf is quite small, so all the detail in the center of the design may not be completely clear. ***


Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.

For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.


This item does not have any reviews yet.