Shiny Spiral Metal Design Stamp, 5.5mm
- Design measures: 5.5mm wide by 5mm high.
- Made from square carbon tool steel.
- Please note that this is the most current version of the shiny spiral stamp. It had to be redesigned.
- This stamp is not rated to work on stainless steel.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
Love the design, stamps really well. Don't care for round shanks but I just added a mark for a reference point.
This is one of my favorite stamps. I use it a lot! It looks great in my designs and stamps really well.
This is my first round shank stamp ... it felt awkward and not very stable. My first couple of attempts left either double impressions or half impressions because I couldn’t get a good grasp on the shank. After about 5 minutes and 10 tries, I finally got some good stampings. If I didn’t like the design so much I would return it.