These cutters boast the high quality that we love from Tronex. The flush blades of this cutter are angulated at the very tip to get into hard to reach, tight spots. These cutters should not be used on wires thicker than 22 gauge.
~
ONLY CUT SOFT WIRE WITH THESE CUTTERS, Fine Silver, Sterling Silver, Gold Filled, Gold
~
DO NOT USE THESE CUTTERS FOR HALF HARD OR HARD WIRE, unless it is one of the above listed metals and is 24 gauge or thinner.
These are my current favorite pliers! That little bent tip is so handy for the final cut in a wire wrapped loop or for cutting apart coils. They are a bit expensive, but in my opinion, totally worth it. Do not abuse that tip. Please read the above guidelines on what wire to cut and what thickness.
