DIY Designs » Textured Flower Ring
Stack as many blanks in any metal!
Learn how to use ring blanks with the pin already attached. See the trick to punching and filing the hole for your stackable blanks. Leave the torch behind and say hello to cold connection!
Textured Flower Ring
Cold connection or Riveting, makes it possible to add a variety of metals with a simple rivet!
Create this layered textured flower ring by stacking all of your pieces on the sturdy pin of our Rivetable Ring. Rivet and they are secured in place.
Tools And Materials
Tools
- Metal Hole Punch Pliers, 1.5mm hole
- Replacement Tip, Small Diamond Bead Reamer
- Economy 10 Piece Dapping Set - Use your Dapping Block to put a slight downwards curve in your flower.
- Fretz Sharp Texturing/Raising Hammer - Use your Fretz Hammer to add great texture to the surface of your blank.
- Beginning Stamping Checklist
- Bubbles Design Stamps, Set of 3
- Xuron Maxi Shear Flush Cutter - Use these Cutters to cut off the loops on your pendant blanks.
- Flat Sanding Sticks, Set of 8 - After cutting the loops off your pendants sand off any rough edges.
- Steel Ring Mandrel
- 6" Square Leather Sandbag
- Round Face Riveting Hammer
Materials
- Copper Tiny Flower with 5 Petals, 24g
- Copper 1" Flower w/Top Loop, 24g - Cut the loop off using your Xuron Maxi Shear Flush Cutters
- Sterling Silver Circle Pendant with Raised Edge (OXIDIZED) - Cut the loop off using your Xuron Maxi Shear Flush Cutters
- Sterling Silver Rivetable Ring, SIZE 5 - Click HERE for a variety of sizes.
DES171